Value for Money -Used Machine - Non Woven Machine

Wool/1185/2022/02

1 FANCY YARN SPINNER PAFA
Yoc: 1984
Type: EXPO 90

24 hollow spindles
3 drafting units for fancy yarn
Electronic control
Delivery on conical tubes 10”,54 x 88 x 280 mm

1 WINDER PAFA
Yoc: 1984
Type: BC 200
 
6 spindles
for flange bobbins 90 x 200 mm

1 SAMPLE SPINNING MACHINE
Yoc: 1980
Edera

6 spindles
Pitch 82,5mm
Ring-Ø 56 mm
Tubes 240 mm
Double apron drafting system for longstaple
Max.drafting system width 220 mm
Change of turns/ and draft
Spindle speed by variable gearboxes
Width 600 mm
Length 550 mm
High with creel ca. 2.200 mm

2 REELING MACHINES CROON & LUCKE 
Yoc: 1980
Type: D800A

Double sided,
20 hanks each side
Pitch 200 mm for hanks 20 -250 g
Circumference 120 – 200 cm
Counter each side
Automatic closing and opening of reels
Speed variator 200 – 400 tpm
380V/3Ph/50HZ

1 REELING MACHINES CROON & LUCKE 
Yoc: 1965
Type: W400

With 2 reels. 1is for reeling
1is for tying during the other reel is working
40 hanks, pitch 130 mm, circumference 100-160 cm
Counter, speed variator 200 – 400 tpm, 380V/3Ph/50HZ

1 REELING MACHINES CROON & LUCKE 
Yoc: 1980
Type: Z60C

Double sided,
For 5 Jumbo-hanks until 3-4 kg each side conic (copsform) and cylindric 
Circumference 1500-2337 mm
Pitch 475 mm for hanks until 400 mm width
Porcellan traverse rollers
Traverse 220 mm, variable speed
Gear motor for opening and closing of reel
Meter counter,2 carts to pull out the hanks in untied form
The reel can start again promptly
During the reel is running
The hanks on the cart can be tied up.

1 BALLING MACHINE CROON & LUCKE
Yoc: 1980
Type: KA1600 + BA 1600

16 spindles, suitable for balls 20-250 gr,
Depending on size of mandrels, automatic labeling,
Automatic doffer with 3 sets of grippers and
Transport of balls  to the packing table,
380V/3Ph/50HZ

1 BALLING MACHINE CROON & LUCKE
Yoc: 1975
Type: K160

16 spindles
Suitable for balls 20-250 gr
Depending on size of mandrels
Automatic labeling
Manual doffer
380V/3Ph/50HZ

1 BALLING MACHINE CROON & LUCKE
Yoc: 1966
Type: K1600A

16 spindles
With 2 sets mandrels for 50- and 100g balls
Semi-automatic ball doffer
380V/3 Ph/50HZ

1 YARN RAISING MACHINE PAFA
Yoc: 1975

Working width 2,80 m
for 40 ends
Wires in good condition
Including 2 spare rollers

1 SHADE CARD MACHINE
Yoc: 1995
Fabr. Wagenfelder
System Mayer for shade cards
Maximum 200 mm width, with 2 heating bars, temeraturcontrol
Variable transport for different shade cards length, cutting device
All functions done by pneumatic cylinders and controlled by timers
Simple handling
Bonding of the yarnends on normal paper by liquid glue (Uhu) and
1 small stripe each shade card and heatingbar.

3 CAKE WINDERS SUPERBA SPIROMAT

With 4 cake-spindles from hank or cone to cake

1 WINDER FROM HANK TO CAN HIRSCHBURGER
Yoc: 1966
Type: K250

16 positions,
Reels variable for hanks
Circumference until 2 m
Cans 250 mm diameter
High 800 mm.

Wool/1184/2022/01

NON WOVEN BONINO CARDING LINE

FOR WOOL, COTTON, VISCOSE AND SYNTHETIC FIBRES
Capacity: approx. 300 - 500 kg / h. depending on fibres

BONINO BALE OPENERS
Yoc: 2005
Type: AB88
Working width: 1’800mm
Manual loading
Including:
1 X horizontal fibre carrying belt
1 X vertical spiked delivery belt
1 X weighing pan
 
BONINO OILING BIN
Yoc: 2005
Including:
Spraying nozzles
Fibre detection sensors
Storage mixing drum
Pump
 
BONINO FIBRE OPENING GROUP
Yoc: 2005
Including Metal detector
Consisting of:
1 X Cyclone
1 X Feeder, Type C86
Working width: 1’200mm
1 X Opener, Type AP50
Working width: 1’200mm
1 X Chute Feeder, Type BCM 2600
Working width: 2’800mm
 
BONINO CARDING MACHINE
Yoc: 2005
Type: CR0093
Working width: 2’800 mm
Including:
1 x fibre volumetric feeding unit
1 x breast opening and carding section with 2 sets of workers and strippers
1 x transporter
1 x main swift 2’200mm diameter, fitted with 6 pairs of worker and stripper cylinders
2 x delivery doffers
 
AUTOMATEX CROSSLAPPER
Yoc: 1995, (fully reconditioned in 2005)
Type: FA 2000
Inlet width: 3’000mm
Delivery width: up to 5’500mm
Computerized settings and controls

Wool/1183/2021/09

03 SETS NSC SCHLUMBERGER PREPARATION LINE MODEL GC15 MACHINES 

First passage, autoleveller, Year 1996, can creel, manual can change, delivery 1 sliver in 1 can dia. 1000 x 1200 mm
.
Second passage,double coiler,Year 1996, can creel, manual can change, can delivery 2 sliver in 2 can dia 700x 1200 mm.

Third passage, bi- coiler, ear 1996, can creel, manual can change, delivery 4 slivers in 2 cans dia. 700 x 1200 mm.

Wool/1182/2021/04

01 SET CHENILLE MACHINE GIGLIOTTI & GUALCHIERI MOD. ACTA 
With 80 Spindles,
Yoc : 1994
(But of course  it is possible to install only one with 96 heads and take advantage of the remaining take out head stock as a spare parts) ,
Ring diam. 127 mm., tube height 450 mm., 
External feeding creel
Blower Magitex

02 SETS CHENILLE MACHINE GIGLIOTTI & GUALCHIERI MOD. ACTA 
N.01 with 64 spindles and N. 01 with 32 Spindles,
Yoc : 1997
(But of course it is possible to install only one with 96 heads and take advantage of the remaining take out head stock as a spare parts)
Ring diam. 127 mm., tube height 450 mm., 
External feeding creel, 
Blower Electrojet,

Total Price : Euro 40.000 CNF Major port

Machine nicely maintained, complete  in good running condition, no broken or missing parts

Supply includes: many plastic spindles tubes, N. 01 Sharpener Device

Wool/1181/2021/01

1  NSC SCHLUMBERGER TB-10

Type: 331 breaker
Yoc: 2001

1 SEYDEL 873 BREAKER
Yoc: 2001
Sliver relaxer CSR-6
Automatic Sliver Datacher ASD-11
Tow vibrator TV-2
                           
1 NSC SCHLUMBERGER GILL RSA/GC 15 REBREAKER
Yoc: 2001

NSC SCHLUMBERGER PREPARATION GC.30
Yoc: 2007
Composed by:
Delivery 1 sliver in 1 can dia. 1000 x 1200 mm.
Autoleveller, delivery 1 sliver in 1 can dia. 1000 x 1200 mm
Delivery 2 slivers in 2 cans dia. 1000 x 12000 mm.
                           
1 NSC SCHLUBERGER VERTICAL FINISHER FINISHER FMV 40
Yoc: 2007
20 Bobbins
Automatic Doffing

5 ZINSER SPINNING FRAMES 450
Yoc: 2002 (4 unit.)
Yoc: 2003 (1 unit.)
720 spindles each,
System: FA.NI+Sensofil
Ring dia: 54 mm
Tube: 260 mm
Gauge: 82,5 mm.
Cowemat, Drafting PK 1601, Individual Electro-jet blower
 + LINK

3 SCHLAFHORST WINDERS 238
Yoc: 2002
30 heads each
Waxing
Loepfe TF-740
Thermosplicer
                           
2 SCHLAFHORST WINDERS 338
Yoc: 2003
32 heads each
Waxing
Loepfe YM-800
Thermosplicer

1 ZINSER SPINNING FRAME 451
Yoc: 2007
828 spindles
System: FA.NI+Sensofil
Ring dia: 56 mm.
Tube: 260 mm
Gauge: 82.5 mm
Cowemat
Drafting PK 1601
Electro-jet blower
+ LINK.

1 SCHLAFHORST OERLIKON 5 WINDER
Yoc: 2007
38 heads
Waxing
Loepfe YM-800
Thermosplicer
 
INSTALLATION OF AUTOMATIC TRANSPORT AND ROBOT COIL ELECTRO-JET
Yoc: 2012

ELECTRO-JET AUTOMATIC PALLETIZING INSTALLATION
Yoc: 2012
                           
LTG CENTRAL CLIMATIZATION
Yoc: 2002


Wool/1180
/2020/10

1 X NSC SCHLUMBERGER BREAKER

Mod: TB11 
Year: 1999 

1 X NSC SCHLUMBERGER RE-BREAKER
Mod: GC-15 R5A 
Year:1999
Electronic autoleveller

Can deliver(it is posible to put ball delivery )
Delivery: prompt

Wool/1179
/2020/10

SAVIO VOLUFIL RRS
VOLUFILE SAVIO PREOWNED MACHINES COMPLETE

01 VOLUFIL MACHINE MAKE SAVIO 
Shrinking and high bulking winder Savio,
RRS Volufil,
Year 1992 ,
24 Heads, Cone delivery 6 “x 4º20’,
Automatic doffing,
Waxing device,
Steam by electric heater,
Over Head blower device.

01 VOLUFIL MACHINE MAKE SAVIO 
Shrinking and high bulking winder Savio,
RRS Volufil,
Year 1992 ,
18 Heads, Cone delivery 6 “ x 4º20’,
Automatic doffing , Waxing device,
Steam by electric Heater, Overhead blower device .

Price : Euro 34.500 CNF for 24 heads 
Price : Euro 28.000 CNF Each  

Wool/1178/2020/08

NSC PREPARATION LINE MOD. GC.14
Year 1992
1 x 1st passage, feeding creel 2 x 10 cans, autoleveller, delivery 1 sliver in 1 can dia. 700 x 1200 mm.
1 x 2nd passage, feeding creel 2 x 5 cans, delivery 2 slivers in 2 cans dia. 700 x 1200 mm.
1 x 3rd passage, feeding creel 2 x 3 cans, delivery 4 slivers in 4 cans dia. 500 x 1200 mm.

Price : USD 62,500 line loaded in container 
1 x NSC mod. GC.15, Year 1998, feeding creel 2 x 5 can,
Delivery 2 slivers in 2 cans  
Dia. 700 x 1200 mm.

Price: USD 29,500 loaded in container
Delivery time: immediate

Wool/1177/2020/08

01 Set Mixer (2M) machine Sant Andrea, Year 1995, 2Hx1Sx1C, Can size 700x1000
01 Set Mixer (SN 3M) Machine Sant Andrea, Year 1991, 3Hx1Cx1S, Can size 700x1000
01 Set Gill VSN with Autoleveller Sant Andrea, Year 1994, 1Hx1Cx1S, Can size 700x1000
01 Set Gill VSN Machine Sant Andrea, Year 1991, 1Hx1Cx2S, Can size 700x1000
01 Set Gill VSN Machine Sant Andrea, Year 1991, 1Hx1Cx1S, Can size 700x1000
01 Set Gill CSN with Autoleveller Sant Andrea, Year 1995, 1Hx1Cx1S, Can size 700x1000
01 Set Gill CSN with Autoleveller Sant Andrea, Year 1991, 1Hx1Cx1S, Can Size 700x1000
01 Set Gill CSN Machine Sant Andrea, Year  1991,1Hx1Cx2S, Can size 700x1000
01 Set Gill BI-Coiler (SH24) Machine Sant Andrea, Year 1991, 1Hx2Cx4S, Can size 700x1000
01 Set Gill Redusar (SHS 24) Machine Sant Andrea, Year 1988, 1Hx2Cx4S, Can size 700x1000
01 Set Gill Redusar (SHS 24) Machine Sant Andrea , Year 1991, 1Hx2Cx4S, Can size 700x1000
02 Sets Bobbiner FRC-22 Machine Cognetex, Year 1990, 1Hx22B

Wool/1176/2020/08

1 X SEYDEL BREAKER MOD. 871
Year : 2000
6 cylinders, with steamer, can delivery 1000 x 1200mm

Wool/1175/2020/07

03 FLAX COMBERS PB31 NSC
Year: 1995
Type LM, delivery 1 can,
700 x 1000 mm, crimping box,
380 V 50 HZ

Wool/1174/2020/07

01 COMBING MACHINE SANT'ANDREA MOD. P90
Year 1994 
Delivery 1 can 800 x 1000 
Crimping box 
Vario circular comb system 
Feediing from cans 24 couplings

Wool/1173/2020/02

01 GILL BOX NSC MOD. GC 12
Year 1984   
Combs head with chain drive,
Feeding creel 12 positions by cans,
Delivery 2 slivers in 1 can 700 x 1200 mm. with auto doffing   
Some cans included
Machine in good condition of maintenance
Condition : Still running

Price : Euro 15.000 CNF

Wool/1172/2020/02

01 CONVERTER TEMATEX
Year 1989
Input load 180/200 Ktex, variable cut length,
Upgraded with Inverter to set feeding,
Linked with drawing frame NSC GC 12,
Delivery 1000 x 1200, Auto doffing

01 CONVERTER TEMATEX 
Year 1987
Input load 180/200 Ktex , 
linked with drawing frame NSC GC 12
Variable cut length,
Delivery 1000 x 1200, Autodoffing,

02 CONVERTER TEMATEX
Year 1991 
Input load 180/200 Ktex, 
linked with drawing frame NSC GC 13
Variable cut length,
Delivery 1000 x 1200, Autodoffing

Wool/1171/2020/01

 

SEYDEL 870 SCHLUMBERGER FM8 AND GC 15 LINE 

SEYDEL STRETCH BREAKER 870
Yoc : 1999
Seydel stretch breaker, overhead creel,
Heater plates, cooling conveyor for high bulk tops,
Sliver compactor on output, automatic can delivery,
Recommended in feed weight 120-220ktex,
Filament fineness 1-17dtex, mean fibre length 80-130mm,
Sliver weight 30-60g/m, delivery speed 240 meter /min.
Practical output 300-450kg/hour. Installed power 115kw

REBREAKER

NSC SCHLUMBERGER GC 15R5L10
Yom : 1996, rebreaker, 
Can creel,1000x1200 manual coiler.
5 roller breaking. Maximum delivery speed 500m/min. 27 cm wide head
Invertors speed control.
 
NSC SCHLUMBERGER PREPARATION LINE MODEL GC.15
Year 1996
First passage autoleveller,
Can creel , manual can change,
Delivery 1 sliver in 1 can dia. 1000 x  1200 mm .
Second passage ,double coiler , year 1996, 
Can creel, auto can change, manual can change,
Delivery 2 sliver in 2 can dia 700x  1200 mm .
Third passage,bi coiler , Year 1996, can creel, 
Manual can change, delivery 4 slivers in 2 cans dia. 700 x 1200 mm.

SCHLUMBERGER FM8A
Year 1996
Horizontal rubbing frame,
20 spindles, manual doffing,
355mm pitch,
2 rovings per bobbin, input 12 to 15 KTEX according to the material,
Roving weight 0.66 -5.5Nm, draft 9 to 26 by gear box,
NSC double apron drafting, draft apron 145 mm wide, rubbing speed 1200 cycles /min maximum, number Rubs 5 to 8 per meter, 300mm bobbin,
Delivery speed up to 220meters/min.

Wool/1170/2020/01

RING SPINNING MACHINE PAFA MOD. EXPO-80
Yoc : 2012
No. 30 Position
No. 02 Drafting lines with feeding from sliver
Package on 10’’ Cones
Revised machine with new electronically head stock
Delivery: Prompt save the sold

Wool/1169/2020/01

RING SPINNING MACHINE PAFA MOD. EXPO 80
Yoc : 2012
No. 64 Spindles
Electronic headstock with PLC for the setting of the cycle parameters
Ring spinning machine with 03 independent draft lines and FED by rovings in bobbins or by cans.
The fancy yarn produced,
Collected in little tubes,
Is suitable for use in weaving and the knitting industry for clothing and decoration.

Delivery prompt save the sold

Wool/1168/2020/01

02 SETS GILL BOX - NSC GN 5

01 SET DRAWING FRAME GILL BOX N.S.C.
Mod. GN 5,
Year 1977
With autoleveller, feeding creel 12 positions by bobbins or cans,
Delivery 1 sliver in 1 can 700 x 1200 mm. with automatic doffing,

01 SET DRAWING FRAME GILL BOX N.S.C. 
Mod. GN 5,
Year 1976
With autoleveller, feeding creel 10 positions by bobbins or cans,
Delivery 1 sliver in 1 can 700 x 1200 mm. with automatic doffing,  

Machine complete and in good condition of maintenance

Total Price : Euro 14.000 CNF major seaport, on n. 01 Container Box 40"

 

Wool/1167/2019/9

NSC PREPARATION LINE MODEL GC.14
Year 1992
1 X 1st Passage, Feeding Creel 2 X 10 Cans, Autoleveller, Delivery 1 Sliver In 1 Can Dia. 700 X 1200 Mm.
1 X 2nd Passage, Feeding Creel 2 X 5 Cans, Delivery 2 Slivers In 2 Cans Dia. 700 X 1200 Mm.
1 X 3rd Passage, Feeding Creel 2 X 3 Cans, Delivery 4 Slivers In 4 Cans Dia. 500 X 1200 Mm.
                      
Delivery time: Immediate

Price : USD 69,500 loaded in container

Wool/1166/2019/4

07 X NSC GILLS
1 x GC.14, Year 1992, feeding creel 2 x 10 cans, autoleveller, delivery 1 Sliver in 1 can dia. 700 x 1200 mm.
1 x GC.14, Year 1992, feeding creel 2 x 5 cans, delivery 2 Slivers in 2 can Dia. 700 x 1200 mm.
1 x GC.14, Year 1992, feeding creel 2 x 3 cans, delivery 4 Slivers in 4 cans dia. 500 x 1200 mm.

Lot price:  USD 85,000.- loaded in container

1 x GC.14, Year 1992, feeding creel 2 x 10 cans, autoleveller, delivery 1 Sliver in 1 can dia. 700 x 1200 mm.
1 x GC.14, Year 1992, feeding creel 2 x 5 cans, delivery 2 Slivers in 2 can dia. 700 x 1200 mm.
1 x GC.15, Year 1998, feeding creel 2 x 5 cans, delivery 2 Slivers in 2 can dia. 700 x 1200 mm.

Lot price : USD 100,000.- loaded in container

1 x GC.14, Year 1992, feeding creel 2 x 3 cans, delivery 4 slivers in 4 cans dia. 500 x 1200 mm.

Price: USD 20,000.- loaded in container       

Delivery time: End of June 2019

Wool/1165/2018/5

Complete Andar Wool Scouring Train
Working width 2 Meter
               Bowl with New (2016) - 6
Drum Chinese Drier - 10
               Year of Manufacture - 1996
              Consisting of
Bale Breaking
Bale Breaker with Hopper with extension,
             Conveyor & Decotter (for cotty wool)
             Incline conveyor
Weigh Belt
Scouring Bowls
             Bowlseach with hopper mini bowls - 6
             Working width  - 2m
             20 ton squeeze roller & outfeed mat on first bowls and
10 ton squeeze rollers on each bowl thereafter
             Steam controlled heating tube
             Long rakes on first Bowl and Head rake on each bowl after
Dirt Loop with Hydrocyclones and Sil Strainers
             Detergent metering pumps
Wet Hopper
Stainless Steel - 316
             Working width with Plastic mat – 2M
Dryer – Chinese
Drum - 10
           Gas fired
           Was added New in 2016
Controls and Monitoring
           By Streat

Wool/1164/2017/11 – A

1 NO RING SPINNING M/C COGNETEX IDEA
Mod.773L
Year 2002
No.672 spindles
Double drive
Gauge 75 mm
Ring diam.51 mm
Pneumatic draft arm SKF PK 6000 or Draft PK 1601
Automatic doffing
Electro-jet trolley blower

Price : Euro 35.000,00 ex mill floor (Biella)

Wool/1164/2017/11 – B

2 NOS RING SPINNING M/C COGNETEX MOD. FTC 8L
Year 1990
No.576 spindles each
Gauge 82,5 mm
Ring diam.51 mm
Draft arm SKF PK1601
Automatic doffing single plier
Siro
Electro-jet trolley blower

Price : Euro 14.000,00 Each - Ex mill floor (Biella)

Wool/1164/2017/11 – C

03 NOS RING SPINNING M/C  COGNETEX MOD. FTC 7L
Year 1992
N.704 spindles each
Gauge 75 mm

Ring diam.51 mm
Draft arm SKF PK1601
Automatic doffing with single plier
Electro-jet trolley blower
No.2 m/cs with Siro

Price : Euro 14.000,00 Each Ex mill floor (Biella)

Wool/1164/2017/11 – D
2 NOS. RING SPINNING M/C COGNETEX Mod.FTC 7L
Year 1995 
No.800 spindles each
Gauge 75 mm
Ring diam.51 mm
Draft arm SKF PK1601
Automatic doffing single plier
Electro-jet trolley blower
No.1 m/c with Siro

Price : Euro 16.000,00 Each Ex mill floor (Biella)

Wool/1164/2017/11 – E

2 NOS RING SPINNING M/C COGNETEX MOD. FTC 8L
(Grey colour)
Year 1989
No.608 Spindles each
Ring diam.55 mm
Gauge 82,5 mm
Tube H.260 mm
Draft SKF PK 1601
Automatic doffing single clamp
Blower Magitex 1 per machine

Price : Euro 17.000,00 loaded into container (Biella)

Wool/1164/2017/11 – F

1 NO COGNETEX FTC 7L / SAVIO ORION I SPINNING LINK CONER
No.800 spindles
Gauge 75 mm
Ring diam.48 mm
Draft arm SKF PK1601
Automatic doffing single plier
Trolley blower magitex
Year 1995
Link to:
Steaming device O.M.V. VAP 40
Year 2002
Winding machine Savio Orion I
No.24 heads
Pitch 6 (152 mm)
Conicity 5°57’
Grooved drum with 2 turns variable step
Electronic clearers Uster Quantum IMK O30+F23 with foreign fibers
Splicer Mesdan mod. 590L
Waxing device
No.1 automatic doffing trolley
Unloading cones conveyor belt
Trolley blower magitex
Year 2002

Price : Euro 50.000,00 Ex mill floor (Biella)

Wool/1164/2017/11 – G

1 NO COGNETEX IDEA 73R / SAVIO ORION I SPINNING LINK CONER
Year 2002
No.960 spindles
Gauge 75 mm
Ring diam.48 mm
Draft arm SKF PK1601
Automatic doffing
Trolley blower Magitex
Year 2002
Link to:
Steaming device O.M.V. VAP 40
Year 2002
Winding machine Savio Orion I
No.24 heads
Pitch 6 (152 mm)
Conicity 5°57’
Grooved drum with 2 turns variable step
Electronic clearers Uster Quantum IMK O30+F23
With foreign fibers
Splicer Mesdan mod.590L
Waxing device
No.1 automatic doffing trolley
Unloading cones conveyor belt
Trolley blower

Price  : Euro 63.000,00 Ex mill floor (Biella)


Wool/1163/2017/10 - A
1 NO SPINNING MACHINE ZINSER RM 450
Year 1999
No.624 spindles
Gauge 75 mm
Ring diam.45 mm
Tube H.260 mm
Pneumatic draft arm PK 6000
Automatic doffing
Blower

Wool/1163/2017/10 - B
1 NO AUTOMATIC CONE WINDER SCHLAFHORST MOD. 338 RM
Year 1999
No.50 heads
Manual feeding by spools
Grooved drum 2 turns parallel
Pitch 6”
Conicity 4°20’
Thermo Splicer
Clearers Loepfe TK 840
FX control
No.1 automatic doffing trolley
Blower

Wool/1163/2017/10 - C
NO. 1 AUTOMATIC CONE WINDER SCHLAFHORST MOD. 338 RM
Year 2001
No.50 heads
Manual feeding by spools
Grooved drum 2 turns parallel
Pitch 6”
Conicity 4°20’
Thermo Splicer
Clearers Loepfe TK 840
FX control
No.1 automatic doffing trolley
No.5 independent spools discharges
Blower


Wool/1162/2017/10

NO 1 SCHLUMBERGER GILL TYPE GC 12
Year 1986
Feeding creel for 10 cans and automatic delivery 1x1 dia. 600x1200mm
Wide head

Price : Euro €15.000 EXW

NO 1 SCHLUMBERGER GILL TYPE GC 12
Year 1986,
Feeding Creel for 10 cans and automatic delivery 2x2 dia. 500x1200mm
220v, Narrow head
Machine fully checked

Price : Euro € 20.000 EXW

NO 1 SCHLUMBERGER GILL TYPE GC 12
Year 1985,
Feeding Creel for 10 cans,
Wide head and manual delivery of 4 Slivers in 4 cans of dia. 500mm

Price : Euro € 14.000 EXW

NO 1 SCHLUMBERGER GILL TYPE GC 12
Year 1986,
Mixed feeding creel for 12 cans or bobbins,
Automatic delivery 1 Sliver dia. 700x1000mm,
220v, Machine fully checked

Price : Euro € 20.000 EXW

NO 3 SCHLUMBERGER GILL TYPE GC 12
Year 1985,
Feeding creel for cans,
Automatic delivery 1 sliver 1 can dia. 700x1200mm
Narrow head

Price : Euro € 15.000/Unit EXW

NO 1 SCHLUMBERGER GILL TYPE GC 12
Year 1986,
Feeding creel for 16 cans,
Wide head and manual delivery 1 sliver 1 can,
Dia. 1400x1200mm

Price : Euro € 12.500 EXW

NO 1 SCHLUMBERGER GILL TYPE GC-12
Year 1985,
Feeding creel for 8 cans,
Wide head and semi-automatic delivery of 1 sliver 1can dia. 1400x1200mm

Price : Euro € 14.000 EXW

Wool/1161/2017/10- B

1 x FINISHER SANT'ANDREA
Year 1986
Mod.RF 2B
No.16 Bobbins
Creel 32 cans
H.Tube 330 mm. diam.50 mm
automatic doffing
No.6.000 Tubes supplied

Wool/1161/2017/10- A

PREPARATION NSC SCHLUMBERGER COMPOSED AS FOLLOW:

No.1 Intersecting Mod.GC12
Year 1988
Mechanical autoleveller
Feeding 10 coupling by bobbins + extra can
Oiling device
Exit 1x1 can 600x1200
Population combs 4 per cm
Can ejector

No.1 Intersecting Mod.GC12
Year 1985
Feeding 10 coupling by cans
Exit 2x2 can 600x1200
Population combs 5 per cm
Can ejector

No.1 Intersecting Mod.GC13
Year 1989 

Feeding 10 coupling by cans
Exit 2x2 can 600x1200
Population combs 5 per cm
Can ejector .

Wool/1160/2017/10

WORSTED COMPACT RINGSPINNING FRAMES

WORSTED COMPACT RINGSPINNING FRAME
Süssen, type Fiomax B-E2, year 2001,
576 spindles, pitch 82,5 mm, ring-dia. 52 mm, tube length 260 mm,
double apron drafting system Fabr. Süssen with compact device Süssen,
automatic doffing like Cowemat, overhead cleaner, 380V/3PH/50 Hz

Price : EUR 39.000,00 CFR

WORSTED COMPACT RINGSPINNING FRAME 
Süssen, type Fiomax B-E2, year 1998,
432 spindles, pitch 85,5 mm, ring-dia. 50 mm, tube length 260 mm,
double apron drafting system Fabr. Süssen with Siro-compact device,
overhead cleaner, 380V/3Ph/50 Hz.

Price : EUR 37.000,00 CFR

Wool/1159/2017/9

6 COMBS NSC PB28LF
3 pcs. 1977, 1 pc. 1979,
With crimper box, combcylinder,
With Vario-segments Fabr. Leisner (former 3-S-Werk)
Feeding: 22 slivers in cans,
Delivery: 1 can dia. 700 x 1.000 mm,
Very good condition,
Still in production with speed 150 cycles/min.

Price : EUR 9.000, Each - loaded

 

1 COMB NSC PB29LF, 1986
With crimper box, combcylinder,
With Vario-segments Fabr. Leisner (former 3-S-Werk)
Feeding: 22 slivers in cans,
Delivery: 1 can dia. 700 x 1.000 mm,
Very good condition,
Still in production with speed 160 cycles/min.

Price : EUR 12.000,- loaded

Wool/1158/2017/8

1 SPINNING PLANT NO. 12 TO NO. 40, COMPOSED OF :

1 Cognetex worsted set Mod. RC, Yoc 1986 about
1st gill box, autoleveller, feeding 6x2= 12 cans/bobbins, delivery 1 can 700x1000mm., 1 silver
Autom. Change.
2nd gill box feeding 4x2=8 cans, delivery 2 cans 700x1000mm., 1 silver each can, autom. Change
3rd gill box feeding  6x2=12 cans, delivery 2 cans 700x1000mm., 2 slivers each can, autom.
Change
1 sant andrea vertical finisher mod. SSR2 Yoc 1985, 16 heads, tube 290mm., autodoffing.
1 Cognetex ring spinning frame mod. FTC Yoc 1988, 608 spindles, gauge 75mm., ring dia.51mm
Tube 280mm., autodoffing, blower.
1 Savio cone winder Mod. ESPERO Yoc 1995, 32 heads, delivery 6’’, 4°20, smart feeder, inspector
Control, loepfe yarn master clearers TK930F (foreign fibers), Waxer, Splicer 490L, 1 autodoffing
Trolley, Electrojet blower, 380 volts/50Hz

OTHER AVAILABILITIES 

1 cognetex worsted set, mod. SC400, Yoc 1988, composed of:
1st gill box feeding 12 cans/bobbins, delivery 1 can 700x1000 mm., 1 sliver.
2nd gill box feeding 10 cans, delivery 1 can 700x1000 mm., 2 slivers.
3rd gill box feeding 16 cans, delivery 2 cans, 700x1000 mm., 2 slivers each can.
1 cognetex finisher mod. FRC-300, Yoc 1989, 16 bobbins, tube 300 mm., autodoffing.

1 Sant Andrea finisher for fine counts, type SSR2, del 1978, 16 bobbins, tube 290 mm.

1 cognetex ring spinning frame mod.FTC Yoc 1990, 576 spindles, gauge 82,5 mm., ring dia.51 mm., autodoffing pantograph.
2 cognetex spinning frames mod. FTC Yoc 1996,  544 spindles, gauge 75 mm, ring dia. 48 mm, automatic doffing pantograph.

Wool/1157/2017/6
17 COGNETEX RING SPINNING MACHINES
2 - 1973, Cognetex ring spinning machine (90)
Model FL-16K
NO automatic leveller/change
Lycra system
Ring diameter 60mm
Gauge 82.5
512 spindles
Tubes of 280mm
Magitex blower
1 - 1983Cognetex ring spinning machine (89)
Model FLC-14
NO automatic leveller/change
Lycra system
Ring diameter 55mm
Gauge 75
544 spindles
Tubes of 275mm
Magitex blower
2 - 1978, Cognetex ring spinning machine (88)
Model FLC-16
NO automatic leveller/change,
Lycra system
Ring diameter 60mm
Gauge 82,5
Tubes of 280mm
480 spindles
Magitex blower
2 - 1977, Cognetex ring spinning machine (52+49)
Model FLC-16
NO automatic leveller/change
Lycra and flame system
Ring diameter 60mm
Gauge 82,5
448 spindles
Tubes of 275mm
1  - 1973, Cognetex ring spinning machine (48)
Model FL-16K
NO automatic leveller/change
Lycra system
Ring diameter 60mm
Gauge 82.5
Tubes of 280mm
512 spindles
1 - 1978, Cognetex ring spinning machine (50)
Model FLC-16
NO automatic leveller/change
Lycra and Flame system
Ring diameter 55mm
Gauge 82.5
Tubes of 280mm
480 spindles
1 - 1993, Cognetex ring spinning machine (87)
Model FTC-L
With automatic leveller/change
Lycra system
Ring diameter 55mm
Gague 82,5
21cm spindle height
544 spindles
Tubes of 275mm
Magitex blower
2 - 1992, Cognetex ring spinning machine (156/155)
Model FTC-L
With automatic leveller/change
Pinter Lycra system
Ring diameter 51mm
Gauge 82,5
Tubes of 255mm
640 spindles
1 - 1990, Cognetex ring spinning machine (157)
Model FTC-L
With automatic leveller/change
Pinter Lycra system
Ring diameter 51mm
Gauge 82,5
Tubes of 255mm
576 spindles
1 - 1992, Cognetex ring spinning machine (86)
Model FTC-L
With automatic leveller/change
Lycra system
Ring diameter 51mm
Gauge 75
576 spindles
Tubes of 255mm
Sohler blower  
2 - 1991, Cognetex ring spinning machine (85x2)
Model FTC-L
With automatic leveller/change
Lycra system
Ring diameter 55mm
Gauge 82,5
548 spindles
Tubes of 275mm
Sohler blower
1 - 1986, San Giorgio/Cognetex ring spinning machine (84)
Model LTC-8
With automatic leveller/change
Lycra system
Ring diameter 55mm
Gauge 82.5
512 spindles
Tubes of 275mm
Magitex blower
Delivery: Immediate.

Wool/1156/2017/5

SPINNBAU CARDING LINE

Manufactured 2013, Installed in 2014. Like new, Very little run time
4 hopper Temafa blend line, 1.6m wide, one with condenser fed from trim machine
Carding  Willow – 800mm wide feed Belt and 1200mmwide – Temafa

Temafa Mixmaster blending bin  - 3m wide x 8m long x 4.6m high (Fill height 3m). 72 Cubic Meter capacity.
Temafa Fine Opener – 2m wide with pins

3.0m Spinnbau Card Feeding Unit – Feed trunk, Vibrating Chute, Weigh Belt
3.0m Spinnbau Carding  Machine – 708mm Breast Section with 3 Workers and strippers, 1500mm main with 5 w/s and (2) 708mm doffers. One foundations and platforms.
Dilo Profiline – batt weight control system
Mahlo Weight Measuring Unit – Qualiscan CMS-12

Dilo Layer Cross lapper – Type DLS 30/60 – 3m infeed and up to 6m laydown. Max web height 650mm
Maximum speed 125m/min.
Spinnbau Lap Drafter Type VST 19 – Maximum 6m working width. 9 roller pairs. Lifting device to allow for 600mm clearance. 159mm roller diameter. Infeed height – 650mm

Bruckner Thermobonding oven – 5 meter oven with 3 heating and 2 cooling zone.  Magnetic belts. 3 Natural Gas Maxon burners.

Slitting – 9 position Bruckner crush cutter slitting heads. Pneumatic lifting. 450mm Knife diameter.

Cross cutter – Rotary cutter style with clamping. Capable of 3 cuts/minute for materials up to 200mm thick.

Winding – Ascending  batch style winder. Maximum roll diameter of 1200mm. 3.0m Driven feed conveyor. Mandrel guidance system, manually adjustable brake system for controlling tensile force and compaction.

Temafa Filter House – TFS 50. Maximum flow 50,000 cubic meters per hour.
Electrical Info -  3 x 480V/60Hz. Controls 110V AC / 24 DC. Siemens  PLC

Wool/1155/2017/5

No. 01 Gill Box NSC GN 6 , 1 sliver / 1 can 600 x 900 ;

No. 01 Gill Box NSC GN 6 with autoleveller, 1 sliver / 1 can 600 x 900

Wool/1154/2017/5

2 x NSC SCHLUMBERGER COMBERS MOD. PB.29.LF
Exit cans dia. 700 x 1000 mm.
Delivery: immediate

Price:  USD 29,500. C&F worldwide lot
  
Payment: 50% in advance and 50% cash against shipping documents

Wool/1153/2017/5

NO. 03 COMBING MACHINE N.S.C. , PB 27 LC  
Feeding creel 24  positions by Bobbins 
Delivery 1 sliver in 1 can 700 x 1000 mm
In good condition of maintenance

Total Price Euro 25.000 cnf

Wool/1152/2017/3

4 x ZINSER MOD. 450 WORSTED SPINNING FRAMES
Year 2001, 816 spindles each,
Ring dia. 48 mm., gauge 75 mm.,
Computer controlled, no automatic doffing
Very good condition.
Frames can be inspected in working condition.

Wool/1151/2017/3

1 INTERSECTING SCHLUMBERGER GC13 CHAIN GILLS, Year 1989
2 x INTERSECTING  DRAWING MACHINE  SCHLUMBERGER GN6, Year 1989
3 x INTERSECTING SCHLUMBERGER GC13 CHAIN GILLS, Year 1989
1  INTERSECTING SCHLUMBERGER DUO/GC13 BLENDING MACHINE, Year 1989
10 x COMBING MACHINE NSC  SCHLUMBERGER PB 30 LF, Year 1989

Wool/1150/2017/1

1 NSC COMBER FOR WOOLLEN / WORSTED YARN
Name of manuf. : NSC
Year 1986
Model : NSC PB29
Q’ty : 1 set

Price : USD18,500 CFR

Wool/1149/2017/1

NO.1 ALMETER AL100 WITH PREPAPRATORY FIBROLINER FL100
TABLE Model , Year 1996
Computer for data management
Software for WinXP (last version)
Converter, PC, Monitor, Printer

Wool/1148/2017/1

NO.1 OFDA 100 INSTRUMENT 
Year 2001
230V  Wool - Measurement of the fibre diameter, crimp, blob along the fibres
No.1 Calibration wool IWTO (set of 8 different samples)
No.1 Software MesWin (including 1 year free upgrades)
Handling and software update as latest version
Apparatus COMPLETELY REVISED

Wool/1147/2017/1

1 CROON & LUCKE Balling machine mod.KABA 1600,
16 spindles.

Wool/1146/2017/1

NO.3 COMBERS S.ANDREA MODEL P90
Yoc 1994
Creel Cans/Bobbins
Exit Can 700X1000

Wool/1145/2017/1

1 BALLING MACHINE CROON & LUCKE (V183)
Croon & Lucke, Year ca. 1985 type KA1600, 16 spindles,
Including 1 set of 16 mandrels 85/44 for 50-100g balls,
Alternative mandrels for 25-50g balls
Special gear for parallel wounded balls
Still in production
Price : EUR 8.000,- Each CFR
REELING MACHINE CROON & LUCKE (V172)
Croon & Lucke, type D800 C, ca. 1985,
For  2 x 8 = 16 Jumbo-hanks until 3-4 kg, conic and cylindric,
Circumference 1,60 – 2,30 m, width 200 – 400 mm
380V/3 Ph/ 50 Hz
 Machine is in good condition and still in running position.

 Price : (EUR 12.000,-Each CFR)             

            Reduced EUR 8.000,- CFR

 

Top | Back