Value for Money -Used Machine - Processing

PROCESS/5919/2019/09
RISING MACHINE
01 SET SECOND HAND LAFER RAISING MACHINE 
Yoc : 2001
Working Width:2.200mm

Equipped With :
02 Superimposed Drums,
Type GRI 90,
Both Of Drums Are Suitable For Raising Knitted Fabric,
Each Drum Is Equipped With 24 Raising Rollers (12 Pile + 12 Counter Pile), Gaskets For 48 Raising Rollers Type 20/24 Made By Shelling,
At Approx.70% Of Use.
Plaiting Device Of Fabric On Trolley From The Same Side Of The Fabric Entrance

01 SET SECOND HAND LAFER RAISING MACHINE 
Yoc : 2001, Type GRI 90,
Working Width 2.200mm,

Equipped With :
02 Superimposed Drums,
The First Drum Installed In Bottom Position Is Suitable For Raising Knitted Fabric,
While The Second Drum Installed In Top Position Is Suitable For Napping Knitted Fabric,
Each Drum Is Equipped With 24 Raising Rollers (12 Pile + 12 Counter Pile), Gaskets For Napping Rollers And Raising Rollers Type 20/24 Made By Shelling,
At Approx. 90% Of Use For 24 Napping Rollers And 70% Of Use For 24  Raising Rollers.
Plaiting Device Of Fabric On Trolley Installed From The Opposite Side Of The Fabric Entranc

01 SET SECOND HAND LAMPERTI SHEARING MACHINE
Yoc : 1994,
Working width 2.400mm,
Suitable for knitted fabric

Equipped with :
01 shearing group on service and 01 shearing group on spare, plaiting device  of the fabric on trolley installed in the opposite side of the fabric entrance in the shearing machine,
This device can be used only for the shearing machine or for plaiting the knitted fabric which has been worked in the full line (raising drum + raising drum + raising drum + napping drum + shearing machine)

01 SET IMPREGNATION BETA PADDER
Yoc : 1999
Working width 2.100mm,
Equipped with three squeezing rollers,
lowering system of the main impregnation vat for an easier cleaning  

PROCESS/5918/2019/09

01 MONFORTS SANFORIZING, YEAR 1991-1995
Entry + J-Scray, Clip Entry; 1,700mm,
Rubber Blanket + Balmer Unit, Rubber Thickness; 60mm, 2,250mm Width,
Roller Width; 2,400mm, Fabric; 2,200mm

01BENNINGER CONTINUOUS BLEACHING RANGE, YEAR 1991-1995
Scouring: E + L Guide, Double Roll Nip, 2 Pre Washer,
Double Roll Squeeze, Chemical Impregnation With Dozing System,
Tight Strand Steamer Capacity; 200 Mtrs, 40 Rolls x 1.20 x 2,
Steamer Length; 10 Mtrs, 2 Post Wash - Benninger EXTRACTA,
Fabric Entry; 2,400mm Roll Width, Working Width; 2,200mm,
Chemical Dozing System (UTI COR), 1 Squeeze + Batcher
Bleaching: E + L Guide, 2 Pre Wash,
Chemical Dozing + Batcher Steamer: Tight Strand; 100 Mtrs Capacity,
Roller Bed; 2,000 Mtrs Capacity, 3 Post Washes, Benninger EXTRACTA,
8 x 2 Drying Cylinders, WUMAG, Germany, 2 x
Cooling Cylinders, Batcher + Plaiter, Steam Recovery

01 BENNINGER PAD STEAM, YEAR 1991-1995
Working Width; 2,200mm
E + L Guide, Squeezer, Steamer 20 Rolls x 2,600mm (2 Chambers),
6 x Washing, Each Washing Has Squeezer After Washing, 8 x 2 Drying Cylinders,
2 x Cooling Cylinders, Batching + Plaiter, Roller Width; 2,400mm,

02 MONFORTS STENTER, YEAR 1991-1995
Single Padder (Matex) + Pre Dryer, Mahlo Weft Straightener (Old),
6 Cameras, 1 x Weft Straightener on Top, Mechanical, 6 Chambers x 2 Motors,
Cooling Zone, Horizontal Pin, J-Scray Delivery, Batching + Plaiter,
Roller Width; 2,400mm, Fabric Width; 2,200mm

01 BENNINGER MERCERIZING, YEAR 1991-1995
Roller Width; 2,400mm, Fabric Width; 2,200mm,
E + L Roll, Squeezing Mangle, 2 Pre Washer Tanks,
Caustic Impregnation, Length 6 Mtrs, Squeezer Padder,
Chain Section; 5,200mm, 2 Stabilizer Compartment, Length; 4,500mm,
Squeezer, Neutralizer, Squeezer, Drying Cylinders, 8 x 2,
Wumag, 1992, Batcher + Plaiter

01 RAMISCH KLEINEWEFERS COLD PAD BATCH, YEAR 1991-1995
E + L Guide - Bicoflex, Swing Roll - Pad Roll, Colour Trough, Dozing,
Roller Width; 2,400mm, Working Width; 2,200mm,
E + L Guide, J-Scray, Padder, Steamer; 2 x IR Heater / Dryer (GoGas Dortmund),
Reaction Chamber (Oil Heated)

04 OTTO FUNKE JIGGER, YEAR 1991-1995
Roller Width; 3,000m, Fabric Width; 2,800mm

01 MONFORTS THERMAL PAD DRY, YEAR 1991-1995
2 x Gas Dryer (Maxon), 1992, 3 x Chamber Dryer, Oil Heated,
Roller Width; 2,600mm, Fabric Width; 2,400mm, Monforts Padder,
Batch Winder, Dozing Pump, Trough, Hydraulic Device,
Batching Unit, Gas + Oil, Batching Unit, Cooling Cylinders

01 MONFORTS THERMEX KTC CURING, YEAR 1991-1995
Working Width; 2,200mm
2 Chambers, Oil Heating, Roller Width; 2,400mm,

01 COMET EMERIZING, YEAR 1991-1995
Working Width; 1,900mm
3 x 2 Rolls, Suction Unit, Brushing Unit, Roller Width; 2,100mm,

01 OSTHOFF-SENGE SINGEING MACHINE
Year : 1991-1995

PROCESS/5917/2019/09

THIES CONE/BOBBIN DYEING PLANT

1 THIES vertical HT cone/bobbin dyeing machine type ECO-BLOC SII 800, capacity 65 Kg,
Carrier diameter 800 mm, SETEX controller 777CE installed in 2015, inverter for circulation pump

2 THIES vertical HT cone/bobbin dyeing machines type ECO-BLOC SII 800, capacity each 100 Kg,
Carrier diameter 800 mm, SETEX controller 777CE installed in 2015, inverter for circulation pump

4 THIES vertical HT cone/bobbin dyeing machines type ECO-BLOC SII 1600, capacity each 500 Kg,
Carrier diameter 1600 mm, SETEX controller 777CE installed in 2015, inverter for circulation pump

1 THIES high pressure dryer for cones/bobbins, type Drucktrockner,
1600 mm diameter, SETEX type 838 control

PROCESS/5916/2019/09

1 SHEARING MACHINE
Yoc (Can be app.): 1995
4 Knifes
Make: VOLLENWEIDER
Working Width: 2800mm

Machine was part of a complete raw material cleaning line for wovens.
2 knifes are for cleaning front side of the material and 2 for the back.

There is no plate on the machine.
As you can see from the photos and our description machine is out of production.
It was part of a complete raw material cleaning line for wovens.

There is just the main body of the shearing left.
No fan or dust collection or inlet or plaiter. no spare parts.
The machine itself is complete including all 4 knifes.

PROCESS/5915/2019/09

1 SHEARING MACHINE
Working Width: 2200 Mm
Yoc: App. 1992
Make: VOLLENWEIDER
2 Knifes, With Brushing Unit, 
Winder For A - Frames, Exhaust Unit

PROCESS/5914/2019/09

1 SHEARING MACHINE
Working width: 2000 mm
Yoc: 1971 / revised 2000 / knife speed inverter controlled
Make: VOLLENWEIDER
Type TSC-1, single knife,
For knitted or woven pile fabric,
Including 1 spare knife

PROCESS/5913/2019/09

1 FRANZ MULLER TIGER BRUSHING MACHINE
Type PRN-32
Roller width 260 cm
Fabric speed infinitely variable between 2.5 - 20 m/min.,
Adjustable distance between fabric and brushing cylinder
Adjustable rotation speed for brushing cylinder
Adjustable fabric tension between front and rear
Seam detector with automatic seam passage device
Brushing cylinder speed 300 - 750 m/min.
Backside brush with arc for adjusting cloth arc
Exit with plaiter

PROCESS/5912/2019/09

COMET CONTINIOUS RAISING MACHINE WITH 3 HEAD
Yom : 1997
Model Pegaso X5

PROCESS/5911/2019/09

LAFER CONTINIOUS RAISING MACHINE WITH 5 HEAD
Yom : 1997
Model GR190 36H 1800
Wires Newly Changed

PROCESS/5910/2019/09

1 LAFER DOUBLE DRUM RAISING MACHINE
Type GRI - 90h-2400
Working width 2200mm
Roller width 2400mm
With Dust Collection and Removal unit

PROCESS/5909/2019/07

PAD DRY THERMOSOL DYEING RANGE
Max working width : 3200mm
Yoc :  2003

Comprising :
Fabric Feeding From A-Frame Unwinding 
High Fabric Frame with Tensioner
E&L Pneumatic Cloth Guiders type KF2020
J-Scray Fabric Accumulator for Non Stop Operation
Set of SS Guide Rollers
E&L Pneumatic Cloth Guiders type KF2020
Benninger Bicoflex Dyeing Padder with Swimming Rolls
Stainless Steel Color Beck
2 x Gas Heated Infra Red Pre-Dryer, Make: GoGAS, Germany
each with 3 Burners on each side, with complete gas burner accessories
and blower fans, Exhaust Fans and Filters, Complete Gas Trane
Monforts Thermax Fixation Oven, 2 Chambers, Thermic Oil Heated
Set of Guide Rollers on Steel Frame
Suction Blower Unit, 3400mm
Fabric Exit with Big Pneumatic Batching Arms
Complete Electric Control Cabinet, 380v, 50hz with Siemens controls

PROCESS/5908/2019/07

NO. 1 ARIOLI STEAMER MODEL MINIG (1998)
Max working width : 2200mm
Capacity : 130 mts.
Inlet - Outlet : Same side

PROCESS/5907/2019/07

KUSTER COLD PAD BATCH DYEING MACHINE
Max working width : 3200mm
Yoc :  2001

Comprising :
High entrance gantry and Scray with E+L KF2020 edge guiders & guide rollers
KUSTER Dye padder Type 222 – 17 – 3200. 2 Swimming rollers.
Stainless steel dye trough with liquor displacement rollers and raise/lower device
Exit with Bastian A frame winder .Separate control desk
SERA dosing pump.
Separate control desk . Hydraulic pack
 
AVAILABLE SEPARATELY
 
BASTIAN A frame Rotation station with 4 electrically driven and 4 hydraulic A frame winding positions.
This machine is still installed in the factory and can be seen running. It is in excellent condition and has worked very low hours.

PROCESS/5906/2019/06

CHEMICAL BONDING LINE

COMPLETE CHEMICAL SPRAY BONDING LINE
Year 1998 – 1999
Material Thickness: 43 g/m²
Speed 96 m/min.
Working width 3400mm
Roller width 3600mm

COMPRISING OF:
2 TEMAFA BALE OPENERS
With apron feed table 1.6 meter wide, length 3m
With Electronic Weighing
Controlled by load cells
Year  : 1999
Driven Belt Feed to

1  TEMAFA MASTER MIX BLENDING BIN, WITH 2 CYLONS
2   TRUETZSCHLER FEEDERS
Model MS 191
Year  : 1999
With Truetzschler Condensers, Type LVSA

2  TRUETZSCHLER FEEDERS
Model MS
Year : 1998
With Truetzschler Condensers, Type LVSA

 1  LOPTEX FIBER SCANNING SYSTEM
 Type Centra + 28
 Year : 2017

1 F.O.R. DOUBLE CYLINDER CARD
 Model HL.3500 / D47C
 Working width 3500mm
 With Truetzschler FBK 536 Chute Feed
Year : 1998
 Main Cylinder 1 with
5 sets of workers and strippers
Double doffer rolls
 Transfer Roll
 Main Cylinder 2
 With sets of workers and Strippers
 Double Doffer Rolls
 2 sets of Taker off and stripper rolls

1 STOWE WOODWARD STRETCHING UNIT, TYPE 150/75
Year 1998

1 CELLI 2-Roller Calendar
Top Roller Steel, Bottom Roller Paper
6 Bar Pressure
Facility to Heat Top Roller by oil (heater not available)

1 CELLI Impregnation Pre-Weting Unit, Year 1998
1 CELLI Printing Unit, Year 1998 with Modification Binder    Unit, Year 2004
1  WUMAG TEXROLL Cylinder Dryer, Year 2006 with 14 Drums
1  FLEISSNER Drum Dryer, Year 1998 with 14 Drums
1  Honeywell MxProline Total Weight Scanner
Model 4080
With Cassel 24 plate Metal Detector
Year  : 2014

09 Cognex Camera Inspection System
With the ability to detect defect rewind to a light window
and allow removal
1  CELLI Automatic Winder and Slitter
Model Combi 3200
Type 815/706
Year 1998
Auto Doffing
With max. 42 Rotary Knife Heads

1  Hageman Mandril handling system
1  KEN MILLS Bale Press
1  DOUBLE -R-CONTROLS Rewinder & Slitter
2  Atlas Copco Air Compressors

Type GA15VSD+ FF
Year 2014
Capacity 2.51 m³/min
Elec. Capacity 15 kW

2  Binder Tanks, Volume 54.000 m³ each
Incl. 4 Mixing Tanks, each 3000

Available : Immediately.

Top | Back